WARNING: Proposition 65 Compliance Statement It is the responsibility of Boost Projects to warn its customers and employees that some products sold on this website contain chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Go to https://www.p65warnings.ca.gov for more information.

Product Description

A & B EPOXY

• Two-part bonding product molds like putty, yet hardens to steel-like consistency
• Does not shrink and is not affected by solvents, oils or gasoline
• Maximum use temperature of 250°F makes it perfect for repairing intake manifolds, cylinder head intake ports, heads and blocks
• Also useful for filling crevices in lifter galleries and installing filter screens
• Can be drilled and tapped when hard
• Adheres to almost any clean surface and hardens in 60 min. at 75°F
• One year shelf life
• Includes easy-to-use applicators

CLIMBING GEAR LUBE

• High-performance, extreme high-pressure gear lube
• Multi-purpose applications including manual transmissions and both conventional and posi-traction differentials
• Contains special “clinging” agents that provide direct adhesion to all moving parts; whereas conventional lubes rely on “splashing and sloshing” to distribute lubricant
• Increased speed of rotating parts causes continuous film of oil to “climb” and spread over surfaces
• Insures complete lubrication of gears, bearings, bushings, shift yokes, synchros, etc.
• Packaged in quarts and gallons
• Recommended for Moroso Differentials Nos. 83000 and 83020

MOLY PASTE ASSEMBLY LUBE

• Heavy-duty assembly lubricant is specially formulated to reduce friction and wear on all metal surfaces
• Extends the life of parts subjected to extreme heat during racing
• Contains molybdenum disulfide (MoS2), which greatly reduces friction and wear
• Moly formula coats surfaces with film that chemically bonds itself to metals, filling in the microscopic “hills and valleys” present in all metal surfaces
• Surface areas coated with Moly Paste™retain an unbroken film of lubricant that reduces metal to metal contact and reduces risk of component failure
• Recommended for use on cams, lifters, bearings, gears, etc. Very effective when storing an engine

NOTE: Do not use on piston rings and cylinder walls.

ENGINE BLOCK FILLER

• Just fill with water,mix and pour into block before machining
• Helps prevent thin cylinder walls from cracking and improves ring seal by keeping cylinders round
• Also dampens unwanted vibrations
• Has expansion rate very similar to cast-iron
• Highly regarded by “Mountain Motor” authority Scott Shafiroff
• Comes with easy to follow, detailed instructions

CERAMIC ENGINE SEAL

• The best Chemical Sealer you can buy to stop cooling system leaks
• Works equally well in aluminum or cast-iron blocks
• Cooling system must be thoroughly clean before use
• Does not work with antifreeze
• If this doesn’t stop the leaks, find yourself a welder!

ALL WEATHER SEAL

• Specially formulated to stop cooling system leaks when antifreeze is present
• Ideal for stopping radiator leaks and sealing cracked blocks in sub-freezing conditions
• Works best when cooling system has been thoroughly cleaned and flushed